S78-13系列機床減振墊鐵

S78-13系列機床減振墊鐵適用范圍：
大中型普通壓力機、剪板機、折彎?rùn)C(jī)等。
Application :
large and medium-size forcing presses、guillotine shears、bending machines and etc.
S78-13系列機床減振墊鐵產品特點：
1、 安裝機床不需埋設地腳螺栓。
2、 調整機床水平方便、迅速。
3、 縮短安裝周期，費用節省。
4、 隔振、減振、降低噪音。
5、 耐油性，耐腐蝕性強
Feature of product:
1．Machines are stationary on floor without anchors.
2．It is convenient and quick to adjust the level of machine.
3．The cost and time of installation can be greatly saved.
4．Vibration and noise can be reduced and isolated by using this product.
5．It can resist oil and corrosion greatly.

S78-13系列使用方法：
1、 將所需墊鐵放入機床地腳孔下，穿入螺栓。
2、 旋轉螺栓調整機床水平。
3、 調整機床水平后，旋緊螺母即可。
How to install:
1． Place the fitting mounts under the anchor holes of the machine. Insert the bolts into the screw holes of the mounts.
2． Screw the bolts for adjusting the level of the machine.
3． Tighten the nuts after adjust the level of machine.

S78-13系列注意：
因?yàn)橄鹉z的蠕變現象，在墊鐵*次使用時，兩星期以后再調節一次機床水平。
Note :
The level of machine should be readjusted after two weeks in use because the rubber may creep when it is used firstly.

S78-13系列技術參數及選用表:
Specification and chart for choice:

選用墊鐵承載力方法：機床自重÷地腳孔數量=單件實際承載
How to choose: Total weight of machine （Kg）/Number of anchors of the machine =The actual resisting load of the mount F（Kg）